Easter Closing Times - We will be closed Friday 29th March and Monday 1st April for Easter bank holiday
Any orders placed during this time will be dispatched from Tuesday 2nd April

Ease Release™ 2831 – Wax-Based Non-Silicone Release Agent

28.00 ex. VAT

Ease Release™ 2831 is a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. Ease Release™ 2831 works with aluminum, steel, and elastomeric mold construction.

Features

  • Excellent Release
  • Non-Silicone
  • Contains no chlorinated or CFC solvents
  • Low wax build-up
  • Increased productivity
  • Excellent cleanability
  • Low environmental hazards
  • Low mold maintenance

(Pint unit – 0.8 lbs. / 0.36 kg.)

Product Documents

In stock

All Ireland Shipping

Instructions

Safety – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.


SHAKE WELL BEFORE USING

Applying – Apply a coat of Ease Release™ 2831 with a spray or brush, and allow to dry. Rub Ease Release™ 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release™ 2831 after each molding cycle.

Finishing – Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.