West System – Epoxy Resin (Marine Grade – Lloyd’s Approved) – B Pack (6KG) SLOW

164.00 ex. VAT

West System 105/206 Slow Hardener, B-Pack (5kg Resin, 1kg Hardener)

105 Resin with 206 hardener
Mix Ratio | 5:1
Pot Life | 20-30 Minutes 100g mass @ 25°C
Open Time | 90-110 Minutes (thin film) @ 25°C
Full Cure | 9-12 Hours (thin film) @ 25°C
Temp Range | 15°C – 35°C
Minimum recommended temperature | 16°C

(Marine Grade – Lloyd’s Approved)

In stock

You may also like...

1 × West System - Pump Set B 22.15 ex. VAT

In stock

All Ireland Shipping

West System Epoxy is a versatile, moisture resistant, high-strength plastic which adheres to a wide range of materials including fibreglass and PVC. This makes it ideal for projects that require water and chemical resistance and strong physical properties for structural bonding.

West System 105 Epoxy Resin

West System 105 Epoxy Resin is the base material on which a 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.

105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C),

105 Resin is designed specifically to cover and bond with wood fibre, fiberglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without fish eyeing.105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

West System 206 Hardener

206 Hardener is slow cure time hardener for larger projects

Epoxy & Fillers Selection Guide


Coverage Guide

Estimating quantities is very important, but also quite tricky, due to the large differences of coverage depending on the thickness,

viscosity and room temperature at which it is applied. The below is a guide for the resin without fillers, at the mid ranges.



All West System products are manufactured under a Quality Management System that conforms to BS EN ISO 9001:2000. As a result West System epoxy is a marine epoxy of the highest quality; to the extent that it has been approved by the Lloyds Register of Shipping for the last 20 years.



  • Marine
  • Boat Repair
  • Bonding
  • Fabrication
  • Barrier Coating


  • Pot life (100 grams cupful):
    • At  25°C: 20 to 30 minutes
  • Working time (thin film):
    • At 25°C: 90 to 110 minutes
  • Solid state:
    • At  25°C: 9 to 12 hours

*Epoxy cures faster at higher temperatures and in thicker applications.


  • Minimum recommended temperature: 16°C

Product Documents

Product Documents