TotalCast Clear Art Casting Resin

26.02295.00 ex. VAT

Total Cast Clear Art Resin is a revolutionary hybrid polymer that produces an optically clear, high gloss finish

  • 1:1 mixing ratio by volume or weight
  • Non toxic and VOC free
  • Odour free and solvent free
  • Built in air release agents and moisture scavengers
  • BPA (Bisphenol) free
  • UV Stable, no need for HALS or UV blockers

You may also like...

1 × resi-TINT Acrylic Pigment 14.00 ex. VAT
1 × resi-TINT MAX Pre-Polymer Art Resin Pigment 50g 13.50 ex. VAT
1 × resi-TINT+ Metallic Powder 20.50 ex. VAT
1 × resi-METAL Metallic Pigment 22.50 ex. VAT

All Ireland Shipping

Total Cast Clear Art Resin is a revolutionary hybrid polymer that produces an optically clear, high gloss finish

Total Cast Art Resin has been ASTM certified non-hazardous and non-toxic. UV Resistance: Total Cast utilises hybrid technology to inhibit yellowing.

The Total Cast range contains a quick and easy mix pack for single use application.

This epoxy resin system is used to coat and seal artwork on canvas, wood, MDF, glass, perspex, concrete, metals etc. The product can be applied by pouring, brush or roller. The excellent clarity and optical transparency makes the resin ideally suited for the protection and decoration of paintings, sculptures & collages, photos & prints, wood & timber artefacts (clocks and puzzles etc), pendants, bangles & other jewellery items, flower setting and paperweights. This formulation represents cutting edge polymeric technology and was developed to offer unrivalled user friendliness and a crystal clear result every time. Please be advised although our resins are U.V stabilised this does not mean they are U.V proof. Ultimately all our clear epoxy resins will show signs of U.V degradation over time. We work constantly to improve the U.V protection however resins are plastics and over time the sun will always win that battle.

Key advantages:

  • 1:1 mixing ratio by volume or weight
  • Non toxic and VOC free
  • Odour free and solvent free
  • Built in air release agents and moisture scavengers
  • BPA (Bisphenol) free
  • UV Stable, no need for HALS or UV blockers

Pack Sizes

Total Cast comes in several pack sizes so you can buy exactly the right amount for your project. To help you choose the correct kit please see the coverage guide below, then make your selection from the drop down list above. The exact coverage will depend on how thick you want your resin coating and the type of media you are covering.

For more information please see Product Documents…

 

Instructions

 

MasterCast Art Coating Resin

totalCAST Art Coating & Casting Resin

UltraCast XT Clear Art Casting Resin

Deep Cast Clear Casting Resin for deep pours

Typical Application

Coating / Resin Art Coating / Casting Casting / Resin Art Deep Casting / River Tables

Max Depth

Up to 5mm Up to 5mm coating/Up to 20mm casting (max 3 kgs in one pour) Up to 15mm Up to 12 litres at a maximum of 50mm deep in one pour

Mix Ratio

1:1 1:1 2:1 2:1

Working Time

15 – 20 minutes @ 23°C 10 – 15 minutes @ 23°C 90 minutes @ 20°C 10 hours @ 23°C

Touch Dry

4 – 5 hours @ 23°C (greater than 500g mix) 3 – 4 hours @ 23°C (greater than 500g mix) 24 hours @ 20°C (greater than 500g mix) Can be de-moulded in 3 – 4 days @ 22°C (greater than 1kg mix)

Full Cure

5 – 7 days 5 – 7 days 5 – 7 days 21 days

 

Please note this resin has a heat distortion temperature of 45-50°C which makes it unsuitable for the placement of very hot objects on its surface such as cups, mugs, plates etc. We recommend UltraCast xt  for excellent temperature resistance.

Differences between Total Cast and MasterCast 1-2-1:

  • Mixed viscosity: Total Cast has a lower mixed viscosity and a thinner consistency than MasterCast
  • Curing time:  Total Cast cures in half the time (3-4hrs), MasterCast offers a longer working time

Both can be used for clear coating over existing artwork made with oil paints, acrylics, enamels, watercolours etc, but Mastercast 1-2-1 is better suited to pigmenting in resin art applications. Total Cast is ideal for pouring in moulds for embedding, potting, encapsulating and jewellery production.

Specifications

  Mix ratio   by weight: 100 parts resin to 100 parts hardener
by volume: 100 parts resin to 100 parts hardener
  Surfaces   canvas, wood, MDF, glass, perspex, concrete & metal
  Curing time   touch dry in 3/4 hours at 23°C, full cure in 5-7 days
  Coverage   1 litre of the mixed product will cover 1.43m²@ 0.5 mm thick (1kg = 1 litre)  No more than 3 kgs in one pour
  Pot Life   10-15 minutes at 23°C (250g mixed mass)
  Shelf life   one year in sealed containers

Mixing

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.

The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. Epoxy systems tend to heat up in a pot than as a thin film, only mix the amount needed for use within the pot life of the product.

Application

The product can be applied by pouring from the mixing vessel, by brush or roller. The mixed resin can be tinted with our resi-TINT pigments, resi-METAL or Cast Magic Metallic Powders to make your artwork pop. resi-BLAST will add stunning cells and effects.

Health & Safety

Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.

  • Always wear nitrile gloves (or use a specialist resin barrier cream)
  • Wear a respirator when sanding partially-cured resin
  • It is advisable to work in a well ventilated room
  • We advise the use of safety goggles
  • Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
  • DO NOT eat, drink or smoke while working
  • In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately

Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.

Product Documents